Checking And Cleaning The Print Head - Windows; Checking And Cleaning The Print Head - Mac Os - Epson ET2710 Series User Manual

User's Guide
4. Examine the printed pattern. If there are broken lines or missing segments as shown in the "NG" pattern, the
print head nozzles may be clogged. Go to the next step. If you cannot see any broken lines or missing segments
as in the following "OK" pattern, the nozzles are not clogged. Print head cleaning is not necessary.
y
5. Hold the button down for five seconds until the power light starts flashing.
Print head cleaning starts.
Note:
It may take some time to start print head cleaning.
6. When the power light stops flashing, print a nozzle check pattern again. Repeat cleaning and printing the
pattern until all lines are printed completely.
Related Information
"Loading Paper in the Rear Paper Feed" on page 36
&

Checking and Cleaning the Print Head - Windows

1. Load A4-size plain paper in the printer.
2. Access the printer driver window.
3. Click Nozzle Check on the Maintenance tab.
4. Follow the on-screen instructions.
Related Information
"Loading Paper in the Rear Paper Feed" on page 36
&
"Accessing the Printer Driver" on page 43
&

Checking and Cleaning the Print Head - Mac OS

1. Load A4-size plain paper in the printer.
2. Select System Preferences from the
then select the printer.
3. Click Options & Supplies > Utility > Open Printer Utility.
Maintaining the Printer
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
88