This guide describes the procedure on how to load Inks into the printer.
1. Unpack and remove all protective materials from the product.
2. Unpacking the ink bottles (Follow the Instructions)
a. Take the bottle out of the poly bag
and remove the Black Tape
3. Filling the ink tanks.
a. Open the ink tank cover, then open the cap for the ink
tank you are going to fill
The technical specifications and performance capabilities listed herein are subject to change at any time and may not reflect actual production capabilities. Graphics One is
not responsible for any incorrect information contained herein and urges any buyer or potential buyer to test the product prior to making a purchase.
Page 1
SUPPORT TB-15000 GOTEK 136-20 ET-2720 Start up Guide How to load SubliMate™ Ink This guide describes the procedure on how to load Inks into the printer. 1. Unpack and remove all protective materials from the product. 2. Unpacking the ink bottles (Follow the Instructions) a.
Page 2
(Do not turn off or unplug the printer or perform any other operations during ink charging or you'll waste ink). Go to https://epson.com/Support/Printers/All-In-Ones/ET-Series/Epson-ET-2720/s/ SPT_C11CH42201 Download your Printer Driver follow the instructions and install it. Connect the printer using a USB/Network Cable or WiFi, the driver wizard will guide you in this process.