Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Figure 7-20. Configure Static Multicast Entry window
To edit or create a new filter, enter the VLAN ID number as well as the desired MAC address in the first
two fields, respectively. Next, check either None, Egress, or Forbidden for each port. None should be
checked if you don't want a port to belong to a VLAN. Check Egress to statically set a port to belong to a
VLAN. Checking Forbidden prevents the port from joining a VLAN dynamically as well as defining the
port as a non-member. Now select a state, Invalid, Permanent, Delete on Reset, or Delete on Timeout.
Click Apply to activate the filter.
Configure IGMP Filtering
IGMP Setup
The IGMP Setup command lets you check and adjust Internet Group Management Protocol settings, which
affect handling of IP multicast packets.
Figure 7-21. first IGMP Configuration window
88
Advertisement
Table of Contents
