Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Figure 2-1. Gigabit Ethernet Switch installed on a Desktop or Shelf
Rack Installation
The DGS-3208F can be mounted in an EIA standard size, 19-inch rack, which can be placed in a wiring closet
with other equipment. To install, attach the mounting brackets on the switch's front panel (one on each side)
and secure them with the screws provided.
Figure 2- 2A. Attaching the mounting brackets to the Switch
Then, use the screws provided with the equipment rack to mount the Switch in the rack.
Figure 2-2B. Installing the Switch in an equipment rack
Power on
The DGS-3208F Switch can be used with AC power sources 100 ~ 240 VAC, 50 ~ 60 Hz. The Switch's power
supply will adjust to the local power source automatically and may be turned on without having any or all
LAN segment cables connected.
5
Advertisement
Table of Contents
