Gigabit Ethernet Switch User's Guide
Port Mirror
The Switch allows you to copy frames transmitted and received on a port and redirect the copies to another
port. You can attach a monitoring device to the mirrored port, such as a sniffer or an RMON probe, to view
details about the packets passing through the first port.
To configure a mirror port, select Enabled from the Status pull-down list. In the first field, select the source
port from where you want to copy frames. In the second field, select the port which receives the copies from
the source port. This is the port where you will connect a monitoring/troubleshooting device such as a sniffer
or an RMON probe.
Trap Manager
Figure 7-5. Port Mirroring window
Figure 7-6. Trap Manager window
76