Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Traffic Statistics
Overview
Click Reset Counter to clear all the counters on the window above.
The information on this table is described as follows:
Update Interval Choose the desired setting: 1 second, 5 seconds, 15 seconds, 30 seconds, 60 seconds
or Suspend.
TX frames/sec Counts the total number of frames transmitted from a selected port per second since
the Switch was last rebooted.
RX frames/sec Counts all valid frames received on the port per second since the Switch was last
rebooted.
% of Utilization This shows the percentage of available bandwidth each port is using over the
amount of time specified by the update interval.
Figure 7-41. Switch Statistics window
100
Advertisement
Table of Contents
