Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Please note that the maximum size for trunk groups 1 to 4 is four ports.
The fields you can set are:
Index Enter the index number (1 through 4, as shown in this screen) that you wish to give the new entry,
or the index number of the entry that you wish to remove.
Status Use the space bar to toggle between Enabled and Disabled. This indicates whether you want to
add or remove a trunk group. Be careful when removing trunk groups as the connections will return to
normal operation, which may cause signal loops.
Description Enter the desired group name. This can be any text string.
Port Member Select two or more ports for this field. Use the arrow keys to move the cursor, and the V
and hyphen keys to select and deselect ports.
Press APPLY to make the changes take effect. The new settings will appear in the table at the bottom of this
screen.
Update Firmware and Configuration Files
The Switch is capable of obtaining its boot-time configuration information, as well as updated versions of its
internal firmware, using TFTP (the Trivial File Transfer Protocol) and BOOTP (the BOOTstrap Protocol). You
can use the Update Firmware and Configuration Files screen to control this feature.
Choose Update Firmware and Configuration Files on the Switch's main menu. The following screen
appears:
Figure 6-43. Port Trunking Configuration screen
56
Advertisement
Table of Contents
