Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Factory Reset
Before performing a factory reset, be absolutely certain that this is what you want to do. Once the reset is
done, all of the Switch's settings stored in NV-RAM (including TCP/IP parameters, SNMP parameters, the
enabled/disabled settings of ports, security settings, etc.) will be erased and restored to their factory default
settings.
1. Choose Factory Reset from the main menu. The following screen appears:
Figure 6-62. Factory Reset screen
2. Move the cursor to Yes to confirm the reset and press <Enter>. The main menu screen should appear.
Logout
To exit the Switch, choose Logout from the main menu. You will be returned to the opening login screen.
70
Advertisement
Table of Contents
