Table of Contents
Advertisement
Fast Ethernet Switching System User's Guide
Software Update Menu
The Software Update menu is used to update the software on the DES-5200.
Software can be updated using either XMODEM or TFTP.
XMODEM requires a direct physical connection between a PC and the DES-5200.
TFTP requires a TFTP server and that you know the Internet Protocol (IP) address
of the server and the complete path and filename. TFTP can be done over the
network or from a remote location.
Software Update
The Software Update panel, displayed in Figure 60, is used to update software
through TFTP.
Figure 60: Software Update Configuration
Download Mode
TFTP is done using Telnet. It can be done from a remote location using a TFTP
server. The TFTP server and the DES-5200 must be on the same domain. For
example, if the IP address of the DES-5200 is 100.100.100.001 then the TFTP
server must have an IP address beginning with 100.100.100. Only the last three
Web Management
109
Advertisement
Table of Contents
