Installing Power Cord Retainer; Rack Installation; Step 3 - Plugging In The Ac Power Cord - D-Link SmartPro DGS-1510-28XMP Getting Started Manual

Installing Power Cord Retainer

recommended to install the power cord retainer together
with the power cord.
1. With the rough side facing down, insert the Tie Wrap
into the hole below the power socket.
Figure 3-1. Insert Tie Wrap to the Switch
Switch.
Figure 3-2. Connect the power cord to the Switch
3. Slide the Retainer through the Tie Wrap until the end
of the cord.
Figure 3-3. Slide the Retainer through the Tie Wrap
4. Circle the tie of the Retainer around the power cord
and into the locker of the Retainer.
Figure 3-4. Circle around the power cord
https://tm.by
Интернет-магазин TM.by
5. Fasten the tie of the Retainer until the power cord is
secured.
Figure 3-5. Secure the power cord

Rack Installation

19-inch rack, which can be placed in a wiring closet with
other equipment. To install, attach the mounting brackets
secure them with the screws provided.
Figure 4. Attaching the mounting brackets
Then, use the screws provided with the equipment rack
to mount the switch in the rack.
Figure 5. Installing the switch in a standard-sized
equipment rack
Step 3 – Plugging in the AC
Power Cord
Figure 6. Plugging the switch into an outlet