Chamberlain Elite EL25 Quick Start Manual page 22

When adding transmitter codes, note the following:
• The label on the back of the transmitter displays the codes necessary to program the transmitter.
ID Number
Button Number
Codes for Buttons 1-3
Codes for Button 4
To activate more than one button on a transmitter, you must repeat all steps for each button. If you want to
•
activate four buttons of a new transmitter, you will need to perform the Program Number fourfour times,
activating each button separately.
Add a Basic Transmitter:
Add a Basic transmitter to the system's database. A basic transmitter will be active, unlock all doors/gates
assigned to the RF module with no time constraints (i.e., can be used 24 hours a day, 7 days a week.).
1 Press Then
2 Enter Transmitter Number (1-65534). Then (
3 Enter Facility Code (0-255). Then (
Example:
1
Activates transmitter number "34430", facility code "3", sequence code "2", ID number "4" and
button "1".
If you make an error during an entry, press the asterisk key (
Transmitters
PASSPORT
SW ID SEQ FC PIN
1-3 03 00 034 12241
4 03 00 163 45009
90
4 Enter Sequence Code (0-2). Then (
) 5 Enter ID Number (0-26). Then (
#
# ) 6 Enter Button Number (1-4). Then (
2
Page 21
Sequence Code
Facility Code
Transmitter Number
#
)
#
#
1
Important: Allthroughepsmust be
performed for EACH Transmitter
assigned.
3 4 5
) to begin again.
*
90
)
)
6
6