Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
When the initial setting screen is displayed
When the projector is switched on for the first time after purchase, as well as when [ALL USER DATA] is executed
from the [PROJECTOR SETUP] menu → [INITIALIZE], the focus adjustment screen is displayed after projection
starts, then the [INITIAL SETTING] screen is displayed. Set them according to the circumstances.
In other occasions, you can change the settings by menu operations.
If you press the <MENU> button while the [INITIAL SETTING] screen is displayed, you can go back to the
previous screen.
Focus adjustment
Adjust the focus to display the menu screen clearly.
You may also need to adjust the zoom and shift.
Refer to "How to adjust focus, zoom, and shift" (x page 64) for details.
1)
Press asqw to adjust the focus.
2)
Press the <MENU> button to proceed to the initial setting.
Initial setting (display language)
Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1)
Press as to select the display language.
2)
Press the <ENTER> button to proceed to the initial setting.
56 - ENGLISH
LENS
FOCUS
FOCUS POSITION
52
ADJUST
INITIAL SETTING
Please select DISPLAY LANGUAGE.
SELECT
SET
ENTER
1/7
Advertisement
Table of Contents
