Panasonic PT-RZ11K Operating Instructions Manual page 178

[User] account
1 [Account]
Displays the account to change.
2 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
1 [Old Password]
Enter the current password.
2 [New Password]
Enter the desired new password. (Up to 16 characters in single
byte)
Note
f To change the account of the administrator, you must enter the [User name] and [Password] in [Current].
[Crestron Connected(TM)] page
The projector can be monitored/controlled with Crestron Connected
It is necessary to access with the administrator rights to start the operation screen of Crestron Connected
the web control screen. (The [Crestron Connected(TM)] button is not displayed in the web control screen with the
user rights.)
The operation page of Crestron Connected
It is not displayed if Adobe Flash Player is not installed on your computer, or the browser you use does not
support Flash. In such a case, click [Back] in the operation page to go back to the previous page.
178 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
is displayed by clicking [Crestron Connected(TM)].
TM
1
2
3
3 [OK]
Determines the change of password.
1
2
3
4
3 [Retype]
Enter the desired new password again.
4 [OK]
Determines the change of password.
.
TM
from
TM