Transmitting A Call; D Transmitting An Individual Call - Icom F6400DS 11 Operating Manual

Previous view
7
NXDN™ OPERATION

Transmitting a call

NXDN operation enables you to make a call to a
specific station (Individual call) or to a particular group
(Group call). Other digital mode transceivers on the
channel will not receive a call that does not match
their Individual or Group ID and/or RAN (Radio Access
Number) code.
NOTE: When the handshake (repeater access) fails
within the specified time period after pushing [PTT],
the transceiver starts roaming.

D Transmitting an Individual call

<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > Signaling/Call > Call List Select)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Signaling/Call,"
then push [OK].
3. Push [Up] or [Down] to select "Call List Select,"
then push [OK].
4. Push [Up] or [Down] to select the Individual
station.
5. Push [PTT] to transmit an Individual call.
6. Hold down [PTT] and speak at your normal voice
level. Release [PTT] to receive.
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
Using [Call List Select]:
1. Push [Call List Select] to display the "Call List
Select" screen.
2. Push [Up] or [Down] to select the Individual ID.
3. Push [PTT] to transmit an Individual call.
4. Hold down [PTT] and speak at your normal voice
level. Release [PTT] to receive.
Using [Individual]:
1. Push [Individual] to display the "Individual Select"
screen.
2. Push [Up] or [Down] to select the Individual ID.
3. Push [PTT] to transmit an Individual call.
4. Hold down [PTT] and speak at your normal voice
level. Release [PTT] to receive.
TIP: You can display the "Individual Select" screen
through the Menu screen.
(Menu > Signaling/Call > Individual Select)
7-3