Icom F6400DS 11 Operating Manual page 46

Previous view
4
ADVANCED OPERATION
Emergency call
D Transmitting an Emergency call (Continued)
The transceiver enters the Emergency mode through
the following functions:
• The Stationary Detection function
When the transceiver is detected as being stationary
(no motion) for the ON Timer preset time.
L If a user moves the transceiver during the Reminder
Timer set time, the Emergency mode is canceled.
(Example)
ON Timer: 60 seconds
Reminder Timer: 60 seconds
Enters the
Emergency mode.
60 sec.
ON Timer
No motion is
detected.
Time
Sends an
Emergency call.
60 sec.
Reminder Emergency
Timer Timer
Stationary
Sensitivity
• The Motion Detection function
When the transceiver continuously moves for the ON
Timer preset time.
L If a user holds down [Emergency] for the Emer SW
OFF Timer set time, before the Reminder Timer set
time expires, the Emergency mode is canceled.
(Example)
Motion Detection Timer: 10 seconds
Reminder Timer:
Enters the
Emergency mode.
10 sec.
ON Timer
Motion is
detected.
4-6
10 seconds
Sends an
Emergency call.
10 sec.
Reminder Emergency
Timer Timer
Motion
Sensitivity
Time