D Sending A Call To A Destination - Icom F6400DS 11 Operating Manual

Previous view
3
BASIC OPERATION
Receiving and transmitting (Continued)

D Sending a call to a destination

When a tone frequency (2-Tone) or code (5-Tone)
is preset in the Call List, a user can select it as a
destination.
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
1. Push [Call List Select] to display the "Call List
Select" screen.
2. Push [Up] or [Down] to select a destination.
3. After selecting, push [OK].
• Returns to the Standby screen.
4. Push [Call] to make a call to the selected
destination.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Signaling/Call > Call List Select)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Signaling/Call,"
then push [OK].
3. Push [Up] or [Down] to select "Call List Select,"
then push [OK].
4. Push [Up] or [Down] to select a destination, then
push [OK].
• Sets the selected destination.
5. Hold down [Back] for 1 second to return to the
standby screen.
6. Push [Call] to make a call to the selected
destination.
3-9