Hand Microphone (For The Mobile Type Transceiver); D About The Status Indicator; D About The Software Key Functions - Icom F6400DS 11 Operating Manual

Previous view
14
OPTIONS
HM-218
hand microphone
[Emer]
[F1]
[PTT]
[OK]
[F2]
[F3]
[Up]/[Down]
[Right]/[Left]
D Connecting the HM-218
Connect the HM-218 to the optional RMK-5
or RMK-7
kit dual head kit
for convenient operation.
separation cable
L See the RMK-5 and RMK7 instruction manual for
details.
1. Connect the microphone cable to the OPC-2364's
MIC connector, as shown to the right.
2. Push [VOL/PWR] on the HM-218 to turn ON the
transceiver.
(for the Mobile type transceiver)
[VOL/PWR]
Status
indicator
Microphone
Function
Display
[P1]
[P2]
[Back]
Ten-Key
Pad
Speaker
separation
using the OPC-2364

D About the Status indicator

• Lights red while transmitting.
• Lights green while receiving a signal, or when the
squelch is open.

D About the Software key functions

NOTE: Dealers can assign the Software key
functions to the keys, and keypad.
LSee page 2-12 for details.
[VOL/PWR]
HM-218
Optional RMK-5 or RMK-7.
14-2
OPC-2364
To the MIC
connector