Troubleshooting Radio Functionality - Chamberlain door opener Owner's Manual

TROUBLESHOOTING RADIO FUNCTIONALITY

The error codes will display at the radio LED.
NOTE: Radio receiver is compatible with 315 MHz remotes.
ERROR CODE SYMPTOM
R1 No response from
the remote.
R2 No response from
the remote.
R3 The remote
cannot be learned.
R4 The remote
cannot be learned.
R5 The remote
cannot be learned.
R6 Cannot close via
constant pressure
in C2, D1 or E2
modes.
DISPLAY POSSIBLE PROBLEM
Quick Flash Unlearned remote - A user tries to use a
remote, but the RADIO LED only flashes
briefly and there is no response from the
operator.
No LED Cannot recognize remote - A weak signal
activity caused by a discharged battery or outside
interference with the radio - OR - the radio
being learned is not compatible with the
operator.
Radio LED Cannot recognize remote - A weak signal
turns off after caused by a discharged battery or outside
30 seconds interference interfering with the learn
process - OR - the radio being learned is
not compatible with the operator.
2 Blinks No free records - A user enters RADIO
function learning mode but there is no
space left to add another remote.
3 Blinks Duplicate remote - A user enters RADIO
function learning and selects the function
to be learned. When the remote button is
pressed for learning, a search reveals that
remote is already learned.
IR LED flashes No safety device present - A safety device
is required to close via constant pressure.
29
CORRECTION
Try re-learning the remote
(page 18).
Replace battery - OR -
eliminate interference - OR -
obtain a qualified remote.
Replace battery - OR -
eliminate interference - OR -
obtain a qualified remote.
Erase all learned remotes and
re-learn the desired remote.
This remote already has a
function associated with it. To
change the function, erase all
learned remotes and re-learn
the desired remote.
Obtain direct connect eyes or a
CPS3 device - OR - change to
a mode that does not require
constant pressure.