Using Your Router; Enabling Auto Update On Your Router - Belkin F9K1116V1 User Manual

Minimum 1GHz processor and 512MB RAM
50MB of free hard-drive space for installation

Using Your Router

Enabling Auto Update on Your Belkin Router
The Router has the capability to automatically check for a newer version of firmware and alert
you when it's available. You can choose to download the new version or ignore it. By default
this feature is disabled. If you want to enable it, select "Enable" and click "Apply Changes".
Note: We recommend you use a computer that has a wired connection to the Router.
Setup steps:
Open a web browser on the computer.
1.
In the address bar of the web browser, type "http://192.168.2.1".
2.
Click "Login" in the upper right-hand corner of the page. The Router does not ship with a
3.
password, so just click "Submit".
Click on "System Settings" in the left-hand column under the "Utilities" heading.
4.
Toward the lower-half side of the screen you will find "Auto Update Firmware Enabling".
5.
6. Select "Enable" by clicking the radio button and then click "Apply Changes" at the bottom of
the screen.