Getting To Know Your Router; Front Panel - Belkin N150 User Manual

GETTING TO KNOW YOUR ROUTER

Front Panel

Your Router's status is shown by the lights on the front panel.
Power Light
Off: The Router is not plugged into a power source.
Solid Green: Power is supplied to the Router.
WLAN Light
Off: WLAN is disabled.
Blinking Green: Wireless data is being transmitted in the WLAN.
Solid Green: WLAN is enabled but no data transfer.
Wi-Fi Protected Setup (WPS) Light
Off: Idle
Blinking Green: The Router is listening for a WPS-
enabled computer or other device.
Successful Connection: The WPS light is SOLID GREEN for
5 minutes and then goes out when the Router has made a
secure connection with the computer or other device.
Failed Connection: The WPS light is BLINKING
GREEN for 30s after the WPS connection fails.
WAN Light
Off: WAN connection is not created.
Blinking Green: Data is being transmitted on the WAN port.
Solid Green: The Router is connected to the Internet.
LAN Light
Off: LAN connection is not created.
Blinking Green: Data is being transmitted on the LAN port.
Solid Green: The Router is connected to
devices through Ethernet cables.
10