Manually Set Up Your Internet Connection - Belkin F9K1116V1 User Manual

Using the WPS Button
1) Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi‐Fi device that you would like to
connect wirelessly to your Router. Often there will be a
button for this purpose in software that came with the device,
or a physical "WPS," "PBC," or "Security" button on the device
itself.
2) Within two minutes, press the WPS button on your Router
and hold for two seconds.
The WPS light (small light above WPS button) will blink blue
while it listens for your Wi‐Fi device. Once a connection is
established, the light will turn blue and then go out. If a
connection is not established, the light will blink amber. You
may repeat the process to try again.
You can repeat this process for each WPS‐enabled device you'd
like to add to your network.
Manually Set Up Your Internet
Connection
Use a browser to visit
The router homepage should appear.
[Image of browser showing the router homepage – see "Tested
QIG 2011 07 14.pdf" provided for guideline]
You can also try visiting
http://router/
http://192.168.2.1/