Getting To Know Your Router; Modem Router; Front Panel - Belkin AC 1200 User Manual

GettinG to Know Your router

Modem Router

Front Panel

A
B
A) Modem router Status Light
Your Router's status is shown by the light on the front .
off: The Router is not plugged into Power Modem's
power source.
Blinking Blue: The Modem Router is starting up.
Solid Blue: The Modem Router is connected to the Internet.
Blinking Amber: The Modem Router can't detect the Power Modem.
Either the Power Modem is unresponsive, or the ADSL (RJ11)
cable is not plugged into the Power Modem, or there is no signal.
B) wi-Fi Protected Setup (wPS) Light and Button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers. To use
the WPS feature on your Router, see "Getting Started > Adding
Computers to Your Network > Using the WPS Button ".
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection .
off: Idle
Blinking Blue: The Modem Router is listening for a WPS-enabled
computer or other device.
Solid Blue: The Modem Router has made a secure
connection with the computer or other device.
Amber: A connection was not created.
34