Manual Setup; Connect To Your Router - Belkin F9K1112 v1 User Manual

Adding Computers to Your Network
Wireless devices such as computers, network printers, and gaming systems can
connect to your Router with a few simple steps.
Using the CD
1) Put the Setup CD into your computer. If the CD doesn't open
automatically, browse to your CD drive and open the Belkin
Setup CD icon.
2) Click the Setup icon on the CD menu.
3) After a brief installation, the setup software will ask you for
the network name and password from the network
information card that came with your Router. This card is
most likely now located underneath the foot of your Router
in the provided card slot.
4) A progress screen will appear while additional software is
installed. This may take a few minutes to complete. Once
finished, a "Success" message will appear indicating that you
are connected to the Internet via your new Belkin Router.
Note: The setup software runs only on Windows and Mac OS X
systems.

Manual Setup

If you know what sort of Internet service you have, you might try a
manual setup. For this, you will need a Wi-Fi-enabled smartphone,
tablet, or computer.

Connect to Your Router

Retrieve the network ID card from the foot of your new Belkin
Router.