Belkin F9K1116V1 User Manual page 36

A disk I plugged into the USB port is not coming on or remains on only for a
short time.
Some drives require more power than the Router's USB port provides. If your
disk has an optional power supply, please use it while the disk is attached to
your Router.
A printer I plugged into the USB port is not showing up on my computer.
1) Is the light on over the USB port that the printer is plugged
into? If not, try unplugging and re‐plugging the printer.
Please check that the USB connector is firmly plugged into
the Router.
2) To print to a printer attached to the Router, your computer
must have that printer's driver installed. Please check that
the driver is installed.
3) The printer may not be set to auto‐connect. Via the Belkin
Router Manager, open the USB Print and Storage Center.
Check that the printer appears in the list of available devices.
View the properties of the printer, and check that "auto‐
connect" is selected.
A different sort of USB device that I plugged into the USB port is not showing up
on my computer.
Most USB devices other than disks and printers must be
accessed via the USB Print and Storage Center.
1) Is the light on over the USB port that the device is plugged
into? If not, try unplugging and re‐plugging the device. Please
check that the USB connector is firmly plugged into the
Router.
2) Via the Belkin Router Manager, open the USB Print and
Storage Center. Check that the device appears in the list of
available devices.
3) Select the device and click the "Use" button. The device will
be virtually connected to your computer until you choose to
"Stop Using" the device, or another person requests use of the
device.