Back Panel
[R DIAGRAM FOR SHARE AND PLAY r_shareplay_back.ai] <diagram needs to be
th
st
updated. Yellow port is the 5
port down (currently it is the 1
port). Also, new
]
belkin branding on the side, suggest saving new image as a different file name>
A) Modem (WAN) Connector
Connect your modem to this port using an Ethernet cable.
B) Wired (LAN) Connectors
Connect computers and other wired network devices to these ports
using Ethernet cables.
C) USB 2.0 Ports
USB printers, disks, and other USB devices plugged into this port
will be shared on your network. Each USB port has a light that
indicates its status.
Off: No USB device is connected or the attached USB device is not in use.
Blinking: Please wait to unplug the device until the light turns off.
On: The USB device is connected and being shared on your network.
D) Reset Button
This button is used to restart your Router in rare cases when it
functions incorrectly. Resetting the Router will preserve your
settings. This button may also be used to restore the factory default
settings. Please see the Troubleshooting section for more
information.
E) Power Connector
Connect the included power supply to this jack.
Technical Details
Technical Features
Integrated 802.11a/b/g/n/ac (Draft 2.0) Wireless Access Point
Utilizing Dual-Band Network technology, your Router creates two
separate networks (one at 2.4GHz band and the other at 5GHz band),