Shipping Bracket - Napoleon GS60-1N Installation And Operating Instructions Manual

8
2.5

SHIPPING BRACKET

EN
THE TOP CASTING IS NOT FASTENED TO THE STOVE ASSEMBLY. IT SIMPLY SITS ON THE STOVE
AS A LID. FOR SHIPPING PURPOSES IT IS HELD IN PLACE BY PLASTIC STRAPPING. ONCE THE
STRAPPING IS CUT, THE TOP SHOULD BE LIFTED OFF CAREFULLY AND STORED IN A SAFE PLACE
TO AVOID DAMAGE WHILE COMPLETING THE INSTALLATION OF THE STOVE. TO AVOID THE
APPLIANCE BEING DAMAGED DURING SHIPPING, A SHIPPING BRACKET HAS BEEN USED AND
SHIPPING BRACKET REMOVAL
Remove the four screws holding the shipping bracket to the bot-
A.
tom of the appliance.
Lift the appliance off the skid and set on a fl at surface.
B.
Discard the screws, brackets and skid.
C.
GLASS DOOR REMOVAL
Lift the top casting off.
A.
Open the valve control cover. Pull the latch handles forward to
B.
release. The door may now be safely removed by swinging the
bottom out and lifting it off.
W415-1328 / A / 01.05.16
MUST BE UNBOLTED BEFORE THE APPLIANCE CAN BE INSTALLED.
WARNING
!
SHIPPING BRACKET
LATCH