Glass Door Installation And Removal - Napoleon GS60-1N Installation And Operating Instructions Manual

38
6.3

GLASS DOOR INSTALLATION AND REMOVAL

Care must be taken when removing and installing door to ensure that the gasket at the top of the door does
not bunch.
EN
When removing the glass door, a simple procedure must be followed in order to not damage the components.
Lift the cast top off of appliance.
A.
Tilt top of cast front forward and lift
C.
out.
E. Pull quick release handles (located on
either side on the bottom) forward and
release 'T' latches. The 'T' latch is threaded
and can be loosened or tightened to adjust
for an effective door seal.
W415-1328 / A / 01.05.16
1
2
B. Remove securing bolts on cast front
(located behind either side on the top)
using a 10 mm wrench (not provided).
Open valve control door
D.
Lift glass door up and off edge of fi re
F.
box top and slide glass door under
top retainers to remove.