ZyXEL Communications WAP3205 User Manual page 93

packet specific statistics and the "system up time". The Poll Interval(s) field is
configurable and is used for refreshing the screen.
Figure 48 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 28 Summary: Packet Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop
WAP3205 User's Guide
DESCRIPTION
This is the WAP3205's port type.
For the LAN ports, this displays the port speed or Down when the line
is disconnected.
For the WLAN, it displays the maximum transmission rate when the
WLAN is enabled and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total time the WAP3205 has been for each session.
This is the total time the WAP3205 has been on.
Enter the time interval in seconds for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll
Interval(s) field.
Click Stop to stop refreshing statistics.
Chapter 9 Monitor
93