ZyXEL Communications WAP3205 User Manual page 80

Chapter 7 Client Mode
The following table describes the labels in this screen.
Table 22 Client Mode: WLAN > WPS
LABEL
Station Site Survey
#
SSID
BSSID
Signal
Strength
Ch.
Auth.
Encrypt
Ver.
Status
PIN
Renew PIN
PIN Start
PBC Start
Stop
Rescan
80
DESCRIPTION
Use the radio button to select the wireless device to which you want to
connect using WPS.
This displays the SSID of the wireless device.
This displays the MAC address of the wireless device.
This displays the strength of the wireless signal. The signal strength
mainly depends on the antenna output power and the distance between
your WAP3205 and this device.
This displays the channel number used by this wireless device.
This displays the authentication method used by this wireless device.
This displays the data encryption method used by this wireless device.
This displays the firmware version running on the wireless device.
This displays Conf. (configured) when WPS has been set up on the
wireless device.
This displays Unconf. (unconfigured) if WPS has not been set up on the
wireless device.
This displays the PIN number of the WAP3205.
Click this button to generate a new PIN and display it in the PIN field.
Click this button to perform wireless security information synchronization
using the PIN configuration method.
Click this button to perform wireless security information synchronization
using the Push Button Configuration (PBC) method.
Click this button to cancel wireless security information synchronization.
Click this button to search for available for WPS-enabled devices within
transmission range and update this table.
WAP3205 User's Guide