ZyXEL Communications WAP3205 User Manual page 56

Chapter 5 Easy Mode
The following table describes the general wireless LAN labels in this screen.
Table 9 Wireless Security
LABEL
Wireless
Network
Name (SSID)
Security
mode
Wireless
password
Verify
password
Apply
Cancel
WPS
56
DESCRIPTION
(Service Set IDentity) The SSID identifies the Service Set with which a
wireless station is associated. Wireless stations associating to the access
point (AP) must have the same SSID. Enter a descriptive name (up to 32
keyboard characters) for the wireless LAN.
The default SSID is WAP3205.
Select WPA-PSK or WPA2-PSK to add security on this wireless network.
The wireless clients which want to associate to this network must have
same wireless security settings as this device. After you select to use a
security, additional options appears in this screen.
Select No Security to allow any client to connect to this network without
authentication.
This field appears when you choose wither WPA-PSK or WPA2-PSK as
the security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Type the password again to confirm.
Click Apply to save your changes back to the WAP3205.
Click Cancel to close this screen.
Click this to configure the WPS screen.
You can transfer the wireless settings configured here (Wireless Security
screen) to another wireless device that supports WPS.
WAP3205 User's Guide