ZyXEL Communications WAP3205 User Manual page 30

Chapter 3 WAP3205 Modes
• Universal Repeater. In this mode, the WAP3205 can be an access point and a
wireless client at the same time. Use this mode if there is an existing wireless
router or access point in your network and you also want to allow clients to
connect to the WAP3205 wirelessly. Go to
Status screen in this mode.
The following figure is a simple illustration of the device configuration modes of
the WAP3205.
Figure 8 Device Mode Example
For more information on these modes and to change the mode of your WAP3205,
refer to Chapter 12 on page
The menu for changing device modes is available in Expert mode only.
Note: Choose your Device Mode carefully to avoid having to change it later.
In Client mode, you should know the SSID and wireless security details of the
access point to which you want to connect.
30
Section 7.5 on page 71
129.
to view the
WAP3205 User's Guide