Loading The Ribbon And Material; Loading The Ribbon - Brady BP-IP600-C Manual

Loading the Ribbon and Material

Loading the Ribbon

Do not use a ribbon for direct thermal printing.
When inserting a ribbon, ensure that the coated side faces
the labels, otherwise the printhead can become dirty.
1. Open the cover (Figure 1, 9) lower the control panel (Figure 1, 17) , and
press the green print module release button (Figure 1, 15).
1
5
2
1. Guide slot
2. Transfer ribbon spindle
3. Spacer
4. Square end
5. Guide slot
Loading the Ribbon and Material
NOTICE
NOTICE
2
2
6
7
Figure 18, Loading the Ribbon
8
10
6. Coated side of ribbon
7. Close points
8. Ribbon take-up spindle
9. Adjustment wheel
10. Ribbon path
3
4
9
7
23