[L2] Sound Length - Yamaha TENORI-ON TNR-W Manual

[L2] Sound Length

Sets the note length (gate time) for all active notes in the current layer.
While holding the [L2] button slide your finger horizontally over the matrix to move the lit
vertical line to the desired setting, or simply press an LED button at the appropriate column.
Moving the line to the right increases the note length.
The LED buttons adjust the Sound Length in the increments listed below. You can also use
the jog dial for finer adjustment in +/-10 millisecond increments.
●
Depending on the voice used, setting a shorter Sound Length may have no effect, or changing the Sound
Length may result in inconsistent sound. Also, the maximum length of user voices is 0.97 seconds, and
setting a longer Sound length will have no effect.
■
Range . . . . . . . . . . . . 10 msec — 9990 msec
■
Default . . . . . . . . . . . 100 msec (all layers)
[Reference]
❊
Layer menu/Sound Length (
Setting Parameters with the Function Buttons
Values selected via the LED buttons.
Matrix display related to settings made via the jog dial.
Sound Length
Layer[01]
100msec
Gate Time
➝
Page 52)
Parameter Settings
[L2] Sound Length
∞
Current Layer Number
TENORI-ON Manual
25