Clear This Layer; Clear All Blocks - Yamaha TENORI-ON TNR-W Manual

4. Clear this Layer

Clears all active notes from the current block and layer. This produces the same result as
briefly pressing the [CLEAR] button.
Rotate the jog dial to display "OK" if it isn't already showing, then press the [OK] button.
To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to
display "CANCEL" and press the [OK] button.
●
This function clears the active notes, but leaves Random Mode rotation data unaffected and active. The LED
buttons can not be used to enter notes while rotation is active. Refer to Rotation (
on stopping rotation.
■
Range . . . . . . . . . . . . OK, CANCEL
■
Default . . . . . . . . . . . OK
■
LED Buttons . . . . . . . Animation displayed when clear executed

5. Clear All Blocks

Clears all active notes from all blocks and layers. This produces the same result as pressing
the [CLEAR] button (long press).
Rotate the jog dial to display "OK" if it isn't already showing, then press the [OK] button.
To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to
display "CANCEL" and press the [OK] button.
■
Range . . . . . . . . . . . . OK, CANCEL
■
Default . . . . . . . . . . . OK
■
LED Buttons . . . . . . . Animation displayed when clear executed
Setting Parameters with the Jog Dial
Current Block Number
Current Layer Number (the layer to be cleared)
Clear this Layer ∞
Block[01] Layer[01]
OK
Clear All Blocks ∞
OK
Parameter Settings
■ Edit Menu
➝
Page 28) for information
57
TENORI-ON Manual