Copy This Block; Clear This Block - Yamaha TENORI-ON TNR-W Manual

1. Copy this Block

Copy all active notes from all layers in the current block to a different block.
Specify the destination block number and then press the [OK] button.
Press the [CANCEL] button to cancel the copy operation.
■
Range . . . . . . . . . . . . 1 — 16
■
LED Buttons . . . . . . . The copy destination block number is displayed as illustrated below.
The destination block number can also be set via the LED buttons.

2. Clear this Block

Clears all active notes from all layers in the current block.
Rotate the jog dial to display "OK" if it isn't already showing, then press the [OK] button.
To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to
display "CANCEL" and press the [OK] button.
●
This function clears the active notes, but leaves Random Mode rotation data unaffected and active. The LED
buttons can not be used to enter notes while rotation is active. Refer to Rotation (
on stopping rotation.
■
Range . . . . . . . . . . . . OK, CANCEL
■
Default . . . . . . . . . . . OK
■
LED Buttons . . . . . . . Animation displayed when clear executed
Setting Parameters with the Jog Dial
Copy this Block ∞
Block[01]
Dest. Block: 02
Copy Destination Block Number
Parameter Settings
■ Edit Menu
Current Block Number
(the copy source)
➝
Page 28) for information
TENORI-ON Manual
55