1. Hardware Volume
Sets the hardware volume.
■
Range . . . . . . . . . . . . 0 — 127
■
Default . . . . . . . . . . . 96
■
LED Buttons . . . . . . . No display
[Reference]
❊
➝
Layer menu/Volume (
Page
2. Master Tempo
Sets the master tempo for all layers and blocks.
This display also appears when the [R2] button is pressed.
The LED buttons can be used to make adjustments in the increments shown below, while the
jog dial can be used for fine adjustment.
■
Range . . . . . . . . . . . . 40 — 240
■
Default . . . . . . . . . . . 75
■
LED Buttons . . . . . . . Values are displayed on the LED button matrix as illustrated below. Adjustments can be
made via the LED buttons from 50 to 200 in 10-step increments.
LED button matrix display in relation to tempo settings made via the jog dial.
[Reference]
❊
➝
Function Button [R2] (
Page
Setting Parameters with the Jog Dial
Hardware Volume
96
50)
Master Tempo
BPM:
75
Tempo settings available via the LED buttons.
31)
Parameter Settings
∞
∞
TENORI-ON Manual
■ Play Menu
43