Copy This Layer - Yamaha TENORI-ON TNR-W Manual

3. Copy this Layer

Copies all active notes from the current layer in the current block to a layer in a different
block. This function will only work between layers that have the same performance mode.
Example: You can copy from layer 1 (Score Mode) to layer 7 (Score Mode), but from layer 1
(Score Mode) to layer 8 (Random Mode).
Use the LED buttons to select the copy destination block and layer numbers (you can also
use the jog dial to select the copy destination block).
When the destination block and layer have been selected, press the [OK] button to execute
the copy operation.
Press the [CANCEL] button to cancel the operation.
●
If the copy source layer has a different performance mode from the destination layer, the "Mode different.
Can't copy!" message will appear. Press either the [CANCEL] or [OK] button to return to the Edit menu.
■
Range . . . . . . . . . . . . Destination Block: 1 — 16,
Destination Layer: 1 — 16
■
Default . . . . . . . . . . . The currently selected block and layer
■
LED Buttons . . . . . . . The columns correspond to block numbers and the rows correspond to layer numbers as
illustrated below. The intersection between the lit horizontal and vertical lines indicates the
destination block and layer numbers.
In this example the selected copy destination block 2, layer 7.
Copy Destination Layer Number
Setting Parameters with the Jog Dial
Current Block Number
Current Layer Number (the copy source)
Copy this Layer ∞
Block[01] Layer[01]
Dest. Block: 02
Dest. Layer: 01
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Copy Destination Block Number
Parameter Settings
■ Edit Menu
Copy Destination Block Number
Copy Destination Layer Number
TENORI-ON Manual
56