Current Layer - Yamaha TENORI-ON TNR-W Manual

4. Current Layer

Provides access to Current Layer file operations.
"Current Layer" files include active notes and settings such as voice, tempo, etc., for the
current layer in the current block.
The following 4 Current Layer file functions are provided:
Load Current Layer
Save Current Layer
Rename Current Layer
Delete Current Layer
● Load Current Layer
Loads a Current Layer file that has been saved to an SD Memory Card into the TENORI-ON.
When a layer is loaded the layer settings for all other blocks will also be overwritten by the loaded data.
1
Make sure the layer that you want to load the data into is selected on the TENORI-ON
(Function Button [R1] Layer Number:
2
Insert the SD Memory Card containing the file you want to load into the TENORI-ON
card slot.
3
Use the jog dial and [OK] button to navigate to the Current Layer function menu as
follows:
"Main menu" ➝ "File menu" ➝ "Current Layer"
4
Use the jog dial to highlight the "Load" function, then press the [OK] button.
5
Current Layer files on the card will appear as a list on the LCD display (with no file
extension). Use the jog dial to select the file you want to load.
●
Only files that are in Current Layer format will be displayed.
Setting Parameters with the Jog Dial
Page 30).
Parameter Settings
■ File Menu
Page 78
Page 79
Page 80
Page 82
78
TENORI-ON Manual