Belkin G User Manual page 84

F5D9231-4_V1000_G+MIMO_RTR_MNL-CLEAN.doc
Page 84 of 111
4. If not already set, at "Configure:", choose "Using DHCP Server". This will tell
the computer to obtain an IP address from the Router.
image] [keep]
5. Close the window. If you made any changes, the following window will appear.
Click "Save".
[keep]
Restart the computer. When the computer restarts, your network settings
are now configured for use with the Router.
Manually Configuring Network Settings in Mac OS X
1. Click on the "System Preferences" icon.
[xxxxxxx]
2. Select "Network" (1) from the "System Preferences" menu.
(1)
[keep]
[use current image]
2
2
[xxxxxxx] [use current
[xxxxxxx] [use current image]
[keep]
[xxxxxxx] [use current image]