Belkin G User Manual page 77

F5D9231-4_V1000_G+MIMO_RTR_MNL-CLEAN.doc
Page 77 of 111
2. A window will open that allows you to select the location where you want to
save the firmware file. Select a location. You can name the file anything you
want, or use the default name. Be sure to locate the file in a place where you
can locate it yourself later. When you have selected the location, click "Save".
[screenshot—PM did not provide]
3. When the save is complete, you will see the following window. Click "Close".
[screenshot—PM did not provide]
The download of the firmware is complete. To update the firmware, follow the
next steps in "Updating the Router's Firmware".
Updating the Router's Firmware
1. In the "Firmware Update" page, click "Browse". A window will open that allows
you to select the location of the firmware update
2. Browse to the firmware file you downloaded. Select the file by double-clicking
on the file name.
[screenshot—PM did not provide]
3. The "Update Firmware" box will now display the location and name of the
firmware file you just selected. Click "Update".
[screenshot—PM did not provide]
file.