Belkin G User Manual page 38

F5D9231-4_V1000_G+MIMO_RTR_MNL-CLEAN.doc
Page 38 of 111
Setting your Internet Service Provider (ISP) Connection Type to Static IP
A static IP address connection type is less common than other connection types.
If your ISP uses static IP addressing, you will need your IP address, subnet mask,
and ISP gateway address. This information is available from your ISP or on the
paperwork that your ISP left with you. Type in your information, then click "Apply
Changes" (4). After you apply the changes, the Internet Status indicator will read
"connection OK" if your Router is set up properly.
1. IP Address (1)
Provided by your ISP. Enter your IP address here.
2. Subnet Mask (2)
Provided by your ISP. Enter your subnet mask here.
3. ISP Gateway Address (3)
Provided by your ISP. Enter the ISP gateway address here.
[insert Static_IP.tif]
(1)
(2)
(3)
(4)