Belkin G User Manual page 41

F5D9231-4_V1000_G+MIMO_RTR_MNL-CLEAN.doc
Page 41 of 111
Setting your Internet Service Provider (ISP) Connection Type to Point-to-
Point Tunneling Protocol (PPTP) [European Countries Only].
Some ISPs require a connection using PPTP protocol, a type of connection most
common in European countries. This sets up a direct connection to the ISP's
system. Type in the information provided by your ISP in the space provided.
When you have finished, click "Apply Changes" (9). After you apply the changes,
the Internet Status indicator will read "connection OK" if your Router is set up
properly.
1. PPTP Account
Provided by your ISP. Enter your PPTP account name here.
2. PPTP Password
Type in your password and retype it into the "Retype Password" box to confirm it.
3. Host Name
Provided by your ISP. Enter your host name here.
[insert PPtP.tif]
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)