Belkin G User Manual page 43

F5D9231-4_V1000_G+MIMO_RTR_MNL-CLEAN.doc
Page 43 of 111
Setting your Connection Type if You Are a Telstra® BigPond/OptusNet
Cable Users [Australia Only]
Follow the onscreen steps and click "Apply Changes" to complete your setup.
Setting Custom Domain Name Server (DNS) Settings
A "Domain Name Server" is a server located on the Internet that translates
Universal Resource Locaters (URLs) like "www.belkin.com" to IP addresses.
Many Internet Service Providers (ISPs) do not require you to enter this
information into the Router. The "Automatic from ISP" box (1) should be checked
if your ISP did not give you a specific DNS address. If you are using a static IP
connection type, then you may need to enter a specific DNS address and
secondary DNS address for your connection to work properly. If your connection
type is dynamic or PPPoE, it is likely that you do not have to enter a DNS
address. Leave the "Automatic from ISP" box checked. To enter the DNS
address settings, uncheck the "Automatic from ISP" box and enter your DNS
entries in the spaces provided. Click "Apply Changes" (2) to save the settings.