Removal of Operation Guide
Follow the procedure below.
1
Switch the breaker on the distribution board to OFF.
2
Remove the remote control from the hanger.
(Page 14)
3
Remove the hanger and
operation guide.
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
6
Switch the breaker on the distribution board to ON.
• The "Power" LED lights up.
To install back the operation guide, follow the procedure above.
(Install the operation guide at step
How to remove the operation guide
4
.)
Phillips screwdriver
Screw
Hanger
Operation guide
59