Smeg Portofino CPF9IPBL User Manual page 30

6. At the end of the pyrolytic cycle, all the
numbers on the display will flash and a
buzzer will sound to indicate the end of
the automatic cleaning cycle.
7. Return the function knob to the "0"
position.
8. The door remains locked as long as the
temperature inside the oven returns to
safety levels.
9. Wait for the oven to cool down and
collect the residues deposited inside with
a damp microfibre cloth.
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time.
1. Set the pyrolytic cycle duration.
2. After selecting the pyrolytic cycle
duration (see "Setting the pyrolytic
cycle"), hold down
The current time added to the pre-set
duration, alternating with text
and the and
flashing) will appear on the display.
3. Press the or
seconds to set the time at which you wish
to terminate the cleaning cycle.
32
Cleaning and maintenance
for 2 seconds.
symbols (the latter
key within 5
4. Press to confirm the set data. At this
point the symbol turns off and the
symbol is steady.
Make sure that you do not turn the
function knob while setting the
pyrolytic cycle. If this is the case then
the data set using the programmer
clock will be deleted and you have
to set them again.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.