Pyrolytic Cycle - Smeg Portofino CPF9IPBL User Manual

4.6 Pyrolytic cycle

The pyrolytic function consists of an
automatic high-temperature
cleaning procedure which causes
dirt to dissolve. Thanks to this
process, it is possible to clean the
oven cavity very easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the oven cavity.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the rack/tray support frames.
• Close the door.
Cleaning and maintenance
Pyrolytic function setting
1. Turn the function knob to the
The symbol and text
automatically appear on the display in
sequence with the pyrolytic cycle
minimum duration (2 hours).
2. Press or
the cleaning cycle time from a minimum
of 120 minutes to a maximum of 3 hours
and 30 minutes. The set minutes will be
indicated by the internal segments of the
clockface, while the hours will be
indicated by the relevant numbers
flashing (1, 2 or 3).
Recommended pyrolytic cycle
duration:
• Light dirt: 120 minutes.
• Medium dirt: 165 minutes.
• Heavy dirt: 210 minutes.
3. After selecting the pyrolytic cycle
duration, the thermostat indicator light
starts to flash and the oven starts to heat
up (approx. 5 seconds after the last
intervention by the user).
4. Press or do not use the display for at
least 5 seconds to confirm the start of the
pyrolytic cycle
.
5. One minute after the pyrolytic cycle has
started the door is locked (the door lock
indicator light comes on) by a device
that prevents the door from being
opened.
It is not possible to select any
function once the door lock device
has been activated.
symbol.
will
within 5 seconds to set
31