Heat & Glo JADE32IN Installation Manual page 58

Inside Fit - CFT Front
(1 Inch to 6 Inch Thick Finishing Material)
The CFT is the only approved front for inside fit applications
(finish material over 1 inch thick). See Figure 10.9. The
CFT decorative front can be installed with or without the
outer decorative front trim (included with the decorative
front).
If the desired look is to include the outer decorative front
trim, finishing materials up to 1-3/16 around the fireplace
opening. See Fig 10.10. For this installation, the inner
decorative front hangs on four tabs located on outer
decorative front trim. The auxiliary hanging brackets are
not used and may be discarded. See Figure 10.11.
If the desired look is to exclude the outer decorative front
trim, finishing material can be installed up to the fireplace
opening. See Fig 10.12. For this installation, the inner
decorative front hangs on four tabs located on the auxiliary
hanging brackets. The outer decorative front trim is not
used and may be discarded. See Figure 10.13.
FINISHING MATERIAL
6 IN. MAXIMUM THICKNESS
Figure 10.9 Maximum Finish Material Thickness - CFT Decorative
Front
58 Majestic • JADE32IN, JADE42IN, JADE42IL Installation Manual • 2491-986 Rev. L • 4/19
FINISHING MATERIAL
6 IN. MAXIMUM THICKNESS
CFT Decorative Front
Non-Combustible Finish Material 1-6 Inches Thick
1-3/16 IN.
Figure 10.10 Clearances to Appliance Opening With Outer
Decorative Front Trim
TABS (4)
TOP VANITY PANEL
(NOT SHOWN)
Figure 10.11 CFT Front Installation With Outer Decorative Front
Trim
1-3/16 IN.
1-3/16 IN. (CFT)
OUTER DECORATIVE
FRONT TRIM
INNER DECORATIVE
FRONT ASSEMBLY