Heat & Glo SLR-X-AU-L Owner's Manual
  1. Manuals
  2. Brands
  3. Heat & Glo Manuals
  4. Indoor Fireplace
  5. SLR-X-AU-L
  6. Owner's manual
Heat & Glo SLR-X-AU-L Owner's Manual

Heat & Glo SLR-X-AU-L Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions regarding installation, operation or service.
NOTICE: DO NOT discard this manual!
Models:
NOTE: NOT INTENDED FOR
NOTE:
FIREPLACE INSERT.
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
DO NOT MODIFY THIS APPLIANCE.
Owner's Manual
Care and Operation
Ref No: GMK10477
AS/NZS 5263.1.3
Heat & Glo • SLR-X-AU-L Owner's Manual • 2653-981 Rev. B • 5/20
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
• DO NOT store or use gasoline or other flam-
mable vapors and liquids in the vicinity of this
or any other appliance.
• What to do if you smell gas
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch. DO
NOT use any phone in your building.
- Leave the building immediately.
- Immediately call your gas supplier from
a neighbor's phone. Follow the gas sup-
plier's instructions.
- If you cannot reach your gas supplier, call
the fire department.
• Installation and service must be performed
by a qualified installer, service agency, or the
gas supplier.
DANGER
DO NOT TOUCH GLASS
NEVER ALLOW CHILDREN
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and shall be installed for
the protection of children and other at-risk
individuals.
HOT GLASS WILL
CAUSE BURNS.
UNTIL COOLED.
TO TOUCH GLASS.
1

Advertisement

Table of Contents
loading

Related Manuals for Heat & Glo SLR-X-AU-L

Summary of Contents for Heat & Glo SLR-X-AU-L

  • Page 1 DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE. DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION. DO NOT MODIFY THIS APPLIANCE. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 2: Welcome

    TO BE INSTALLED ON WOOD FLOORING OR NON-COMBUSTIBLE FLOORING. See installation manual for details. Serial Number Model: Gas Type: Seri a l : MADE IN USA XXXX-XXX Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 3: Table Of Contents

    C. Contact Information ......33  = Contains updated information. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 4: Limited Lifetime Warranty

    Firepots, Burnpots, Mechanical Feeders/Auger 3 years Assemblies Vent Free Burners, Vent Free Logs 5 years 1 years Castings Medallion and Baffles 2000-645G (5-20) Page 1 of 3 Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 5 HHT (8) modification of the appliance not expressly authorized and approved by HHT in writing; and/or (9) interrup- tions or fluctuations of electrical power supply to the appliance. 2000-645G (5-20) Page 2 of 3 Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 6 444 Swan Street 277 Lord Street 55 Marickville Rd. Richmond 3121 East Perth 6000 Marickville 2204 (03) 9429-5573 (08) 9228-2600 (02) 9505-8505 2000-645G (5-20) Page 3 of 3 Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 7: Product Specific Information

    * The allowable Outlet (Manifold) Gas Pressure ranges are: Natural Gas .80 - .95 kPa (.87 kPa nominal) and Propane, ULPG 2.37 - 2.61 kPa (2.40 kPa nominal). Certification testing setpoint values are shown. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 8: Important Safety And Operating Information

    • Install a switch lock or a wall/remote control with child protection lockout feature. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 9: General Operating Parts

    Use appropriate finishing materials that are able to withstand these conditions. For additional finishing guidelines, see Section 10 in the appliance Installation Manual. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 10 Sugges�ons on how to further reduce TV temperatures: Increase “A” dimension. Increase “C” dimension, however, increasing “B” dimension beyond maximum recommended typically results in higher temperatures. Figure 3.4. Good Faith TV Guidelines Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 11: Before Lighting Appliance

    • Ensure that the glass is sealed and in the proper position and that the integral barrier is in place. WARNING! Risk of Fire or Asphyxiation! DO NOT op- erate fireplace with fixed glass assembly removed. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 12: Lighting Instructions (Ipi)

    Keep burner and control compartment clean. See installation and operating instruc- Propane Installation code, CSA B149.1. tions accompanying appliance. For additional information on operating your 593-913i Hearth & Home Technologies fi replace, please refer to www.fi replaces.com. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 13: Appliance Break-In

    If this occurs, restart the appliance. NOTICE! Open windows for air circulation during fire- place break-in. • Some people may be sensitive to smoke and odors. • Smoke detectors may activate. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 14: Operation During A Power Outage

    • Remove the batteries from the battery tray. Replace door or decorative front on appliance. • Reinstall component heat shield. • Replace door or decorative front on appliance. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 15: Control Module Operation

    This is required for servicing and/or resetting the control module in the event of a control module LOCK-OUT. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 16 To prevent unintended operation when not using your fire- for compliance could void the user’s authority to operate place for an extended period of time (summer months, the equipment. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 17 The memory will be cleared. Note that the RC300AU will not be programmed if it’s in STANDBY mode. Press the ON/OFF button twice to switch to IDLE mode. Figure 3.10 Mounting Remote Control Housing Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 18 Use the SELECT button to select the current Select feature. Menu Menu Use the UP and DOWN arrows to toggle through the menu functions and value selec- Select Select tions in the submenus. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 19 • Press and hold the MENU and UP arrow buttons simul- taneously for 4 seconds to enable or disable the child lock feature. NOTICE: No functions will be usable until child lock feature is disabled. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 20 At control module, turn off fireplace by sliding the ON/OFF/ Remote control or control REMOTE switch to OFF. Warning! Risk of Burns! Fireplace is module failure hot. Use caution when accessing module. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 21: Heat Management

    Once the optional Heat-Zone -240V Kit is installed by a ® qualified service technician during the appliance installa- tion process, follow the instruction supplied with the kit for operation. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 22: Maintenance And Service

    (consult with your dealer) • Carefully set fixed glass assembly in place on fireplace. Hold glass in place with one hand and secure glass latches with the other hand. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 23 WARNING! Risk of Explosion! Risk of Asphyxiation! Glass latches MUST be properly engaged. Inspect glass seal before installing decorative front. Gas could leak! 5. Reinstall decorative front. Figure 4.1 Fixed Glass Assembly Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 24: Maintenance Tasks - Qualified Service Technician

    • Verify burner is properly secured and aligned with pilot or igniter. • Clean off burner top, inspect for plugged ports, corrosion or deterioration. Replace burner if necessary. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 25 • Inspect for damaged or missing logs. Replace as neces- sary. Refer to instructions included with kit for log place- ment. • Verify correct log placement and no flame impingement causing sooting. Correct as necessary. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 26: Frequently Asked Questions And Troubleshooting

    Installer’s Manual for this the touch. appliance. Contact your dealer for additional information regarding operation and troubleshooting. Visit www.heatnglo.com to locate a dealer. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 27: Troubleshooting

    D. Pilot valve solenoid. Verify that 1.5 to 1.8 VDC is supplied to pilot solenoid from module. If below 1.5 volts, replace module. If 1.5 volts or greater, replace valve. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 28 B. Shutter Setting Check to assure correct shutter setting for your model and gas type. C. Gas Type Assure correct fuel matches unit gas model and components. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 29: Reference Materials

    An optional glass refractory kit is available for SLR-X-AU- L . Follow the instruction supplied with the kit for installa- tion. Contact your dealer if you have questions. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 30: Service Parts

    Glass Assembly GLA-SLR-X-AU Lower Panel 2493-103 2493-129 Heat Shield, SL Linear Blower Assembly 2264-500A Header Heat Shield 2118-120 Additional service part numbers appear on following page. 5/20 Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 31 12.14 SRV2166-323 Battery Pack 12.15 SRV2118-420 Grommet Orifice N (#37) 582-837 Orifice ULPG (#.057) 582-057 Orifice P (#53) 582-853 Additional service part numbers appear on following page. Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...
  • Page 32 PB2N-SLR-X-AU Conversion Kit P & ULPG N2PB-SLR-X-AU Pilot Orifice N SRV593-528 Pilot Orifice ULPG 593-529 Pilot Orifice P SRV593-527 Regulator N NGK-DXV-50 Regulator P & ULPG SRVLPK-DXV-50 Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

  • Page 33: Contact Information

    This product may be covered by one or more of the following patents: (United States) 6601579, 6769426, 6863064, 7077122, 7074035, 7098269, 7234932, 7258116, 7322819, 7422011, 7470729, 7726300, 8147240, 9625149 or other U.S. and foreign patents pending. 2000-945E Printed in U.S.A. - Copyright 2020 Heat & Glo • SLR-X-AU-L Owner’s Manual • 2653-981 Rev. B • 5/20...

Table of Contents