Vision Fitness 7200HRT Owner's Manual page 12

Suspension elliptical trainer
Table of Contents

Advertisement

DRAFT - DO NOT PRINT
PLACEMENT IN YOUR HOME
Please follow the safety instructions to place the Suspension Elliptical Trainer in the
location where it will best be used. It is important that you place your Suspension
Elliptical Trainer in a comfortable and inviting room. Avoid putting your Suspension
Elliptical Trainer in an unfinished basement or undesirable setting. Exercise adherence
will be easier to achieve only if you exercise in an attractive setting.
STABILIZING THE
SUSPENSION
ELLIPTICAL
LOOSEN
TRAINER
After
positioning
the
Suspension
Elliptical Trainer in its intended location,
check the unit's stability. Rocking or
wobbling indicates that your Suspension
Elliptical Trainer needs to be leveled.
Determine which leveler is not resting
completely on the floor. Loosen the nut
at the base of the leveler to allow the
ROTATE
leveler to rotate. Now rotate the leveler
to the left or right until the Suspension
Elliptical Trainer is stable. Lock the
adjustment by tightening the nut against
TIGHTEN
the support tube.
TURNING THE UNIT ON AND
OFF
Use the power switch on the front of the
unit to turn the machine ON and OFF. It
is recommended to turn the machine off
when not in use.
NOTE:
You can also turn the power off
at the console.
8

Advertisement

Table of Contents
loading

Table of Contents