Preset Reduce/Enlarge - Ricoh Aficio 1232C Operating Instructions Manual

Copying

Preset Reduce/Enlarge

You can select a preset ratio for copy-
ing.
2
❖ ❖ ❖ ❖ Base Point
The base point of Reduce/Enlarge
differs depending on how the orig-
inal is scanned. When the Original
is set on the exposure glass, the up-
per left corner will be the base
point. When it is set to the docu-
ment feeder, the bottom left corner
of the original will be the base
point.
1.
Base point when setting on the ex-
posure glass.
2.
Base point when setting on the
document feeder.
Reference
Related Initial Settings
⇒ p.99 "Copy Function Key: F1-
F5"
⇒ p.100 "R/E Priority"
34
Note
❒ When making reduced copies from
A3 or B4 originals to A4 OHP trans-
parencies, set the OHP transparen-
cies in tray 1 in the K direction and
use the Auto Reduce/Enlarge
f u n c t i o n . ⇒ p . 3 6 " A u t o R e -
duce/Enlarge"
A A A A
Press [Reduce/Enlarge].
Note
❒ To select a preset ratio on the in-
itial display, press the shortcut
reduce/enlarge key and go to
D
step .
B B B B
Press [Enlarge] or [Reduce].
C C C C
Select a ratio, and then press [OK].
D D D D
Place your originals, and then
press the { { { { Start} } } } key.